9/20/2019 How To Install Rainbowcrack Ubuntu
The first thing you need to do is extract the files from inside the tar archive to a folder. Let's copy the files to your desktop. You can extract an archive by right-clicking the archive file's icon inside your file browser and pressing the appropriate entry in the context menu. Extracting the archive should create a new folder with a similar name. Now you need to open your terminal and navigate to that directory using the following command: cd /home/yourusername/Desktop/program-1.2.3 Make sure you read a file called INSTALL, INSTALL.txt, README, or something similar if one was extracted. You can check if such a file exists from the terminal by using the ls command. The file can be opened and read with the command: xdg-open INSTALL Where INSTALL is the name of your file.
This file will contain the right steps to follow to continue the installation process. Usually, the three 'classical' steps are:./configure make sudo make install You may also need to install some dependencies if, for example, running configure prompted you with an error listing which dependencies you are missing. You can also use checkinstall instead of make install. See here Remember that your mileage may vary. You cannot 'install' a.tar.gz file or.tar.bz2 file.tar.gz files are gzip-compressed tarballs, compressed archives like.zip files.bz2 files are compressed with bzip2. You can extract.tar.gz files using: tar xzf file.tar.gz Similarly you can extract.tar.bz2 files with tar xjf file.tar.bz2 If you would like to see the files being extracted during unpacking, add v: tar xzvf file.tar.gz Even if you have no Internet connection, you can still use Ubuntu's package management system, just download the.deb files from. Do not forget to download dependencies too.
For an easier way to install packages offline, see the question. How you compile a program from a source. open a console. use the command cd to navigate to the correct folder. If there is a README file with installation instructions, use that instead. extract the files with one of the commands.
If it's tar.gz use tar xvzf PACKAGENAME.tar.gz. if it's a tar.bz2 use tar xvjf PACKAGENAME.tar.bz2./configure. make. sudo make install Download a package from the software sources or the software center. If you install a package via the software sources and not downloading the package on your own, you will get new updates to that package and install them via the Update Manager. You could just install MYPACKAGE by typing in a terminal: sudo apt-get install MYPACKAGE or by using the software center and searching for MYPACKAGE. But if it's not there go with the source.
@Alvar:./configure && make && sudo make install assumes that the package uses an autoconf style of configuring and compiling programs. You should search for the files INSTALL, README or similar. Also, make install won't work if the prefix is set to a privileged location (which is the default).
Therefore, use sudo make install or install it into a directory in the home directory using./configure -prefix=/yourprogram. Then put /yourprogram/bin in your $PATH or make symlinks to it in /bin/. – Nov 19 '11 at 10:14. First things first It is generally not advised to download and install applications from the internet files. Most applications for Ubuntu are available through the 'Ubuntu Software Center' on your system (for example, ).
Installing from the Software Center is much more secure, much easier, and will allow the app to get updates from Ubuntu. That said, how to install tar packages The best way is to download the tar.bz2 and tar.gz packages to your system first. Next is to rightclick on the file and select extract to decompress the files. Open the location of the folder you extracted and look for the Readme file and double click to open it and follow the instruction on how to install the particular package because, there could be different instruction available for the proper installation of the file which the normal routine might not be able to forestall without some errors. It is difficult to answer specifically, as each software may have a different build process, even if they are archived as a TAR/GZ What I can say for most source codes that I know of is that you will first need to extract the tarball archive into a folder of your choice. Then most source codes rely on the AUTOCONF and MAKE programs, so you will need to use the following commands:./configure make To build your binaries, and then: make install To install it in the system.
'./configure' uses the autoconf mechanism to retrieve information on your system, and prepare the build scripts in the source file in order to build the appropriate binaries compatible with your installation. 'make' will invode the build itself, that will create the binaries out of the source code. 'make install' will then copy the binaries, documentation, configuration file, etc. Into the appropriate folders of your system so that the software is available to the users. It is a very basic explanation, the real answer is: read the documentation provided with the source code. Only there you will know exactly how to build it.
You should always try to install software from repositories whether it's official, a PPA/any other unofficial repository. That way, you'll get all stable release, security and new feature updates while you install other system updates. Another advantage is that you don't need to worry about building, dependencies and harder uninstallation (since the application won't appear in synaptic) with tar files.
For example, you can install mysql by installing mysql-server package. If you really want to use tar files, the common process is to run (make install may require sudo):./configure make make install Please note that some of the above commands may not be necessary, please refer to any readme files in the tar file or try to run./configure -help.
Files with the extension tar.bz2 are what is commonly known as a compressed tarball. Other examples are.tar.gz (more common) and.tgz. You can extract this file with. Tar -xvjf file.tar.bz2 This will extract the files from the tarball into the directory you are currently in and should create a new directory there with in that the files from the tarball. Short explanation on the options:.x: extract.v: verbose: show what is being extracted.j: type of compression, in this case bzip2.f: 'next comes the filename' This is probably not enough though. Depending on what it is it could have a complete compiled setup and you need to cd into the new directory and start an executable.
It could also contain the source to a program that you need to confire, make, make install. Generally (ie. I would assume) it should contain a readme that explains what to do next. Warning: Installing software like this will NOT install any dependencies and will complain if you try to install a tarball before you installed these dependencies. Use a website or the file itself to find out if there are dependencies and install those first. But always always always first try to find a.DEBian installation file or a link to a ppa so you can use ubuntu software center.
How To Install Rainbowcrack Ubuntu
If you are trying to install the gimp plugins you skipped parts of the installation process mentioned. Wget ftp://ftp.gtk.org/pub/babl/0.1/babl-0.1.10.tar.bz2 tar -xvf babl-0.1.10.tar.bz2 cd babl-0.1.10/./configure make sudo make install and you will also need gegl: wget ftp://ftp.gimp.org/pub/gegl/0.2/gegl-0.2.0.tar.bz2 tar -xvf gegl-0.2.0.tar.bz2 cd gegl-0.2.0/./configure make sudo make install Before downloading the files with wget visit the website and see if it has newer versions. These instructions are from the 3rd of May 2012 so they could be old;).
Kali Linux is a well known Linux distribution for security professionals. It comes with dozens of network security tools, penetration tools, and ethical “hacking” tools. For most cases, it’s highly recommended to install this operating system on a USB stick, or on a dedicated hard drive. However, if you’re in need of some seriously impressive penetration testing tools and you use Ubuntu, there’s a much easier way: Katoolin. It’s a simple Python script that can quickly install all of the great tools from Kali right on your Ubuntu installation.
Install Katoolin Installing network penetration tools on Ubuntu isn’t easy, as the software isn’t included in the primary software sources. Luckily, this can be fixed with the Katoolin Python script. It lets the user choose individually each set of tools to install. It also separates them into categories. Going this route makes it easier for the user to identify what the tools are, etc. Getting the script itself is quite easy as it’s on Github. To grab the script for Ubuntu, you’ll first need to install the Git package, as it’s necessary for interacting with Github.
Open up a terminal window and enter the following: sudo apt install git When the Git package is fully installed, you’ll be able to use the program to clone the source code directly to your Ubuntu PC. Keep in mind that you won’t be able to modify this code, as it’s not yours. Cloning only gives you read-only access to the software repository. Git clone After the code downloads, it’ll be ready to use right from where it is. Dil mil gaye star one songs.
That said, it’s better to go through the installation process for this app, as you may use it a lot and installing it as a regular program may be more convenient. To install the Katoolin app as a program on your Ubuntu PC, move it to /user/bin/ in the Root file system. Sudo mv katoolin/katoolin.py /usr/bin/katoolin Now that you’ve moved the app, you’ll need to update its permissions using the chmod command. Sudo chmod +x /usr/bin/katoolin Using Katoolin Katoolin ultimately is a tool that can add a PPA and install a program (or uninstall it) from a list. To get started with it, you’ll first need to open up a terminal window and enter: katoolin Writing this command should automatically give you access to the app, and from here you can explore it and install different network security and penetration tools, most of which are usually pre-installed on the Kali Linux operating system. To start installing apps, press #1 on the menu (Add Kai repositories & update), followed by the enter key. Selecting this option adds the Kali software source to your operating system, the GPG key, etc.
This section will not install any software on your system. The Katoolin app nicely breaks down each of the security tools into different categories. If you’re interested in viewing any of these categories, press the #2 button on your keyboard, followed by the enter key. The application categories are “Information Gathering”, “Vulnerability Analysis”, “Web Applications”, “Sniffing & Spoofing”, “Maintaining Access”, “Reporting Tools”, “Exploitation Tools”, “Forensics Tools”, “Stress Testing”, “Password Attacks”, “Reverse Engineering”, “Hardware Hacking”, and “Extra”.
To install specific applications, first select the category in the menu. From there, Katoolin will install all related apps.
For example, to install all of the “Information Gathering” tools on Ubuntu, you’d press #2 in the menu, followed by #1 in categories. Alternatively, users can install the massive amount of applications that the Katoolin script has to offer in one go by ignoring the category system altogether. To do this, run the script, select #2 (view categories), then press 0 to install everything. Take note that this option will take much longer than selecting one type at a time. Uninstalling Network Apps Uninstalling apps installed with the Katoolin tool is pretty straightforward, thanks to the built-in uninstallation process the script has to offer.
To use it, launch the script normally: katoolin Once it’s open, press #1 on the keyboard to select “Add Kai repositories & update.” Inside the “Add Kai repositories & update” area, click #3 to remove all of the Kali repos on your PC. Removing the application software source from your Ubuntu PC doesn’t instantly uninstall the software. Instead, you’ll need to delete everything manually, and there are a lot of programs to remove. In an effort to make things easier, copy the uninstall command below and past it into a terminal to remove all programs installed by Katoolin on your Linux PC.
How to Compile RainbowCrack on OpenBSD RainbowCrack was originally Zhu Shuanglei's implementation, it's not clear to me if the project is still just his or if it's even been maintained for a while. Seems to have been last updated in August 2007. Now has just binaries for Windows XP and Linux, both 32-bit and 64-bit versions. Earlier versions were available as source code. The version 1.2 source code does not compile on OpenBSD, and in my experience it doesn't compile on Linux, either.
It seems to date from 2004 at the earliest, and I think it makes some version-2.4 assumptions about Linux kernel headers. Here is how to get it to compile on OpenBSD., it isn't clear just who,: OpenBSD patch for RainbowCrack v1.2 (11 May 2004) In 2004, RainbowCrack didn't work on OpenBSD, so I wrote. That may have worked in 2004, but it didn't quite work for me some 5.5 years later and beyond. I don't know why, but the patch file (the output of diff) included there could not be applied.
Do the following to compile and install RainbowCrack on OpenBSD: Step 1: Download the file from. Step 2: Extract the archive: $ unzip rainbowcrack-1.2-src.zip Step 3: Change into the directory with the source code, and just to be safe, save a backup copy of a file you're about to replace: $ cd rainbowcrack-1.2-src/src $ cp Public.cpp Public.cpp-ORIGINAL. Step 4: to that directory, overwriting the existing one. Step 5: to that directory. I have slightly modified the makefile to build the binaries as linked statically rather than dynamically.
How To Install Rainbow Crack
Step 6: Build the software: $ make -f makefile.openbsd Step 7: If that worked, install the new programs and save the documentation! $ su # chown root.root rcrack rtdump rtgen rtsort # cp rcrack rtdump rtgen rtsort /usr/local/bin # mkdir /usr/local/share/doc/rainbowcrack # cp -r./.txt./doc/. /usr/local/share/doc/rainbowcrack.
Ok, the good news is that it is easy to compile. You may want to look at ophcrack (it's really easy to use, the live cd is even easier to use. If you want to compile rainbowcrack youself, then read on: You'll need a few packages first, grab: sudo aptitude install build-essential openssl libssl-dev Download rainbowcrack-1.2-src.zip, and un-zip it to your home folder. (and unzip rainbowcrack-1.2-src-algorithmpatch.zip to /rainbowcrack-1.2-src/src if you want use of md5 and other hashing stuff). Open up a terminal, and change to the /rainbowcrack-1.2-src/src directory: cd /rainbowcrack-1.2-src/src Now to compile it: make -f makefile.linux That generates a few files for you, the important ones you need are: charset.txt list.txt randomlmalpha#1-7.hash randomlmalpha#1-7.plain randommd5loweralpha#1-7.hash randommd5loweralpha#1-7.plain randomsha1loweralpha#1-7.hash randomsha1loweralpha#1-7.plain rcrack rtdump rtgen rtsort So if you like, copy those files to a new directory. Then to use it, an example would be:./rtgen lm alpha 1 7 0 21 all A good tutorial for it is here (This program worked for me for a simple 3 character xp password I created myself solely as a test for the program. Again, if you're wanting to use this for windows passwords, use ophcrack, it's much easier to use.
Ok, the good news is that it is easy to compile. You may want to look at ophcrack (it's really easy to use, the live cd is even easier to use. If you want to compile rainbowcrack youself, then read on: You'll need a few packages first, grab: sudo aptitude install build-essential openssl libssl-dev Download rainbowcrack-1.2-src.zip, and un-zip it to your home folder.
(and unzip rainbowcrack-1.2-src-algorithmpatch.zip to /rainbowcrack-1.2-src/src if you want use of md5 and other hashing stuff). Open up a terminal, and change to the /rainbowcrack-1.2-src/src directory: cd /rainbowcrack-1.2-src/src Now to compile it: make -f makefile.linux That generates a few files for you, the important ones you need are: charset.txt list.txt randomlmalpha#1-7.hash randomlmalpha#1-7.plain randommd5loweralpha#1-7.hash randommd5loweralpha#1-7.plain randomsha1loweralpha#1-7.hash randomsha1loweralpha#1-7.plain rcrack rtdump rtgen rtsort So if you like, copy those files to a new directory. Then to use it, an example would be:./rtgen lm alpha 1 7 0 21 all A good tutorial for it is here (This program worked for me for a simple 3 character xp password I created myself solely as a test for the program.
Again, if you're wanting to use this for windows passwords, use ophcrack, it's much easier to use. Nicely written, follow that tutorial, and try to re-build and you should be successful.
If you use Windows, you are probably familiar with the Add/Remove Programs tool in the Windows control panel. It lists the programs currently installed on your system and provides an easy method for uninstalling them with only a few clicks. In Ubuntu, you can add and remove programs very easily using the Ubuntu Software Center. In fact, it’s easier to install commonly available software than in Windows. When you want a specific type of program in Windows, you need to search online for it and possibly buy it. Then, you download it and install it.
Finding software to install in Ubuntu is also easier than in Windows. You can search in the Ubuntu Software Center for specific types of programs or browse the different categories of software. Once you find a program you want to install, you can do so directly in the Ubuntu Software Center, rather than downloading it and installing it as a separate step. NOTE: Not all software in the Ubuntu Software Center is free, but there are a large number of programs that are. To access the Ubuntu Software Center, click the suitcase icon on the Unity Launcher.
When the Ubuntu Software Center opens, click “Installed” on the toolbar at the top of the window. A list of categories displays. Click the right arrow to the left of the category under which the program you want should be located.
NOTE: You can also search your installed software using the Search box in the top-right corner of the window. When you find the desired program, click on it to display the options.
Click “More Info” to view more details about the program. A description and some screenshots of the program display. To uninstall the program, click “Remove” above the screenshots. When you scroll down, you may see some “Optional add-ons,” if any are available. Also available is information about the Version, Total size, License, and Updates.
Scrolling down further reveals the “People Also Installed” box that contains a list of other programs and tools that people who installed the currently selected program also installed. Below that box is a list of reviews for the program.
To go back to the list of installed programs, click the “Back” (left arrow) button on the left side of the toolbar. You can also uninstall a program directly in the list of installed programs without accessing the program’s information screen. Simply click the “Remove” button to the right of the “More info” button. When you click “Remove” (in either location), a dialog box may display informing you of other items or add-ons that must be removed as well to uninstall the currently selected programs. Click “Remove All” to remove these items and uninstall the selected program. The Authenticate dialog box displays. Enter your password in the “Password” edit box and click “Authenticate.” The program is uninstalled and removed from the list of installed programs.
As mentioned at the beginning of this article, you can also install programs using the Ubuntu Software Center. If you’re still on the “Installed” screen, click “All Software” on the toolbar to display all available programs.
A list of categories displays on the left with some new and recommended programs on the right. Click on the category on the left that is likely to contain the program you want to install. We decided to look for a new email program to replace Thunderbird, so we clicked on “Internet” in the list of categories. You may be presented with some sub-categories at the top of the window.
Click the icon for the sub-category likely to contain the desired program. For example, we clicked “Mail” in the “Internet” category. Scroll through the list of programs until you find the program you want to install and select it. Click the “Install” program on the right side of the screen. NOTE: If you want to view a description of the program and some reviews of it before installing the program, click “More Info.” You can install the program the information screen as well. NOTE: You can also find programs to install using the Search box in the upper-right corner of the window.
Enter your search term in the Search box. As you type, programs matching what you’ve entered so far displays below the toolbar an Search box. When you click “Install,” the Authenticate dialog box displays. Enter your password in the “Password” edit box and click “Authenticate.” The progress of the installation displays above the “Install” button. Once the program is installed, the “Install” button becomes the “Remove” button. The program will also be listed in the list of installed programs when you click “Installed” on the toolbar. To close the Ubuntu Software Center, click the “X” button in the upper-left corner of the window.
The program now displays on the Unity Launcher. You can also.
If you’re a more experienced Linux user, you can install programs in Ubuntu.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |